Front Sway Bar D Bushes

[grelise]

Anyone changed these on the AWD's?
Pretty simple or a bastard to do?
Mine need changing and will be doing it this weekend.

[spud100]

Did mine when I changed to the thicker sway bar.
Pretty easy as they are split.

Car up, block off.
Remove wheel.
If only doing one side at a time you will need to push the suspension up on the side that you are working on.
Piece of wood on top of the jack, placed under the outboard end of the lower control arm will do.
Undo the 2 bolts on the bush clamp.
Pull the bush out, remove from bar.

Reverse steps to put the new bush on.
If you have changed to Nolathane or something similar then don't forget the grease between the bush and the bar.

Gerry

[grelise]

Cheers mate, looks to be a simple job.
Yeah there Nolathane, so should last longer than the car.
Also there doesn't seem to be a listing for rear Nolathene D bushes, anyone know if they exist?